
-
A UTV Rear Seat is to be used at low speeds only with Rear Passengers, just as if it were installed on a typical Golf Cart..They are not for UTV higher speeds or unsafe terrain or driving conditions. Enjoy, Stay Safe, Have fun..But always Drive Responsibly...Use at Buyer's own risk.
No Refunds, No Exchanges, No Cancellations - these are all Custom Fabricated Per Order!
-
- This Grizzly Product is RAW METAL FINISH (Grizzly's Standard Finish) - HOWEVER, below we do offer to send it out to our professional powder coated for powder coating...see below for pricing and how to order it with powder coating!!
- High Quality Metal & Fabrication
- Buyer can easily paint as we describe - suggestion Rustoleum Professional Spray Paint & Primer is a great Option- Black Semi-Gloss or of course your choice, (Take your time - 2 or 3 coats of primer and then the same with the spray paint..Great Finish then) - Easy and affordable to touch up after rugged work or play or even Truck Bed Coating, some buyers will LineX - many good ways to finish DIY Or you may want to powder coat when it arrives so you can view in person the sheen that your powder coater offers to match the stock Pioneer cage sheen.
-
IMPORTANT: FOR ALL DUMP BED SIDE X SIDES!!
-
For All Side x Sides which have the Rear Cargo Dump Bed Feature..
-
It is Imperative AND REQUIRED That CUSTOMER MUST BOLT OR SECURE PROPERLY THE DUMP BED FEATURE WHILE THE REAR SEAT IS INSTALLED AND IN USE; To Avoid Any Potential Accidential Dumping While Carrying Riders!
- This Grizzly Product is RAW METAL FINISH _ High Quality USA Metal!
- Buyer can easily paint as we describe - suggestion Rustoleum Professional Spray Paint & Primer - Semi-Gloss, Gloss - Easy and affordable to touch up after rugged work or play or even Truck Bed Coating, some buyers will LineX - many good ways to finish DIY Or you may want to powder coat when it arrives so you can view in person the sheen that your powder coater offers to match the stock Pioneer cage sheen ...
-
- We Do Offer an Option for us to send out to our Industrial Powder Coater - see Below - these freight out on an extra large pallet and although we strive to wrap and secure to the best of our ability with wrap and moving blankets, once it is out of our hands we have no control over a bump in freight or with a forklift driver..
- We are Not Responsible for transit powder coating dings - Central Transport is amazing however as a Freight Company!
- Should you decide you would want the OPTION OF POWDER COAT, we cannot take any responsibility for freight "powder coating dings" once it is out of our hands - we wrap well with moving blankets, etc. but ships on an extra large pallet! Central Transport has amazing fork lift drivers, but these are extremely large to freight, being the reason Raw Metal Finish is our Standard!
Email gailglenfield@comcast.net if you want to add Powder Coat which we will invoice separately for..
-
Top Notch Powder coating sheens offered: Matte Black, Gloss Black, Textured Black..
-
HOWEVER, if you have it powder coated at your own powder coater; have them show you the sheen - various powders can produce a different sheen.
- POWDER COATING - Current Pricing with Top Notch Powder Coating
- Rear Flip Seat Assembly $300
- Option: Reverse "U" Grab Bar with 2" Receiver $150
- Option: 2" Receiver $50
- Option: 15" Pair of Welded Grab Bars $15
- Option: Seat Belt Option- Mounting Bar $50 (If "Small" Universal Seat - n/a as those seat belts mount to frame)
Est. Days at Powder Coater once we deliver to them - Add'l 7-9 Business Days
-
From our Information about the Polaris Ranger Mid Size 500 & 570....
A 500 & 570 MIDSIZE have the same Rear Cargo Box Size: 32L x 42W x 11.5H
Therefore as Both Models have the Same Rear Size Cargo Bed, the Rear Flip Seat Assembly is the Same Size..
13 Gauge Expanded Sheet Metal, Base, Flip & Foot Plate Standard build- Heavy Duty, Flat/Smooth - Super Build - Extra Sturdy!
Please email: gailglenfield@comcast.net with questions
-
IMPORTANT: FOR ALL DUMP BED SIDE X SIDES!!
-
For All Side x Sides which have the Rear Cargo Dump Bed Feature..It is Imperative to BOLT OR SECURE PROPERLY THE DUMP BED FEATURE WHILE THE REAR SEAT IS INSTALLED; To Avoid Any Potential Accidential Dumping While Carrying Riders!
Also, Includes Amazing & Effective Heat Shield - New Black Seat Cushion Set - 13 Ga Expanded Smooth Sheet Metal - Mounting Instructions and Hardware!
Additional Options - Seat Belt Assembly with Grizzly's Seat Belt Mounting Bar & Hardware; Custom Heavy Duty 2" Receiver to Foot Plate - (Great for short tongue trailers or quick hook ups, etc.....Does not interfere with stock Honda's hitch) & 14 Gauge Tread plate footplate; Pair of 15" Welded Grab Bars to Handle Bars
See Checkout for Option pricing with pictures below - Options available for Grizzly UTV Rear Seat Assemblies!
2" Receiver DOES NOT interfere with stock receiver...Great for quick hookups, pull a boat around, utility cart, around a campground!
BELOW SHOWS PICTURES OF OUR EXTENSIVE FREIGHT WRAPPING PROCESS OF THE EXTRA LARGE PALLET: 52" X 48" X 31" TO PROVIDE THE BEST FREIGHT DELIVERY TO YOUR LOCATION!
-
IMPORTANT: FOR ALL DUMP BED SIDE X SIDES!!
-
For All Side x Sides which have the Rear Cargo Dump Bed Feature..It is Imperative to BOLT OR SECURE PROPERLY THE DUMP BED FEATURE WHILE THE REAR SEAT IS INSTALLED; To Avoid Any Potential Accidential Dumping While Carrying Riders!
All Metal Fabrication is done 100% at Grizzly Metalworks Shop in Chickamauga, GA!
-
(Must be Factory, stock Polaris Ranger 500 570 with stock rear bed that comes with that model! You may message or email us with a picture of your Ranger if you have any questions about modifications which may not allow this to fit...)
GRIZZLY'S CUSTOM REAR FLIP SEAT WELDED ASSEMBLY
- Instantly turns your 2 Passenger Polaris Ranger Mid Size 500/570 into a comfortable and stealthy 4 Passenger!
- And if you have a 4 Passenger Model, it will instantly turn it into an incredible comfortable and stealthy 6 Passenger Side x Side!!
This is an ultra heavy duty, precision design for sturdy, rugged use but with comfort in mind!
This Complex Extra Heavy Duty Product is Amazingly Easy to Install with Grizzly's Unique Heavy Duty Design which incorporates the Main Frame is Welded - No confusing Bag of hardware for the multiple mounting locations!
- Buyer will easily mount the new Black Upper Seat Back cushion & then install the Base Cushion to the Flip Frame Section - The Flip Frame Section quickly bolts to welded Main Frame Unit!
- INCLUDED: Quality New Black Seat Cushion Set
- INCLUDED: Welded Sheet Metal Muffler heat shield - no more open exposed muffler at the rear!
- INCLUDED: Huge 46" x 43" 13 Gauge Expanded Sheet Metal, Heavy Duty, Flat/Smooth - Converts to a Big Buck Rack when in Open Position
- INCLUDED: Mounting Hardware and Install Instructions
- INCLUDED: We will construct a new freight pallet for the shipping with wrapping and securing and Delivery to the Freight Terminal in Chattanooga, TN after our fabrication.
- Fabrication in Chickamauga, Georgia, USA - Not from overseas or Assembly Line Built and stored in a warehouse
- BUYER WILL EASILY INSTALL THE BASE CUSHION TO THE FLIP SECTION
-
IMPORTANT: FOR ALL DUMP BED SIDE X SIDES!!
-
For All Side x Sides which have the Rear Cargo Dump Bed Feature..It is Imperative to BOLT OR SECURE PROPERLY THE DUMP BED FEATURE WHILE THE REAR SEAT IS INSTALLED; To Avoid Any Potential Accidential Dumping While Carrying Riders!
- We do order the Polaris Ranger 500 570 Mid Size Rear Seat Cushion Set in Black from our supplier - it is a Premium Rear Seat cushion set - not flimsy - not cheaply made.
All Metal Fabrication is done 100% at Grizzly Metalworks Shop in Chickamauga, GA!
-
(Must be Factory, stock Polaris Ranger 500 570 with stock rear bed that comes with that model! You may message or email us with a picture of your Ranger if you have any questions about modifications which may not allow this to fit...)