Honda Pioneer 500 Rear Flip Seat - Big Buck Rack Assembly - Huge 46" x 43" Rear Rack when in Flip Position; which then includes Additional Storage for Coolers, Tools, Off Road Items & more Behind the Rear Seat Cushion Set!
- $650.00 RAW METAL FINISH + Freight
- Freight: Low $89.95 (However, Pacific & Mountain Time Zones Add'l $80.00 due to Freight surcharge with distance for this large palleted product.)
- As described in this description product page - this is a Raw Metal Product; Not Painted! Not Powder Coated - Unless you Add the Powder Coat Option
- Includes New Black Rear Seat Cushion Set & Welded Rear Seat Assembly -
- Oversized to fit the Large Stock Rear Rack of the Honda Pioneer 500!
- Buyer can easily paint as we describe - suggestion Rustoleum Professional Spray Paint & Primer - Semi-Gloss, Gloss or even Truck Bed Coating makes good finishes! Or you may want to powder coat when it arrives..We also offer to send out to our outsourced Industrial Powder Coater for additional fee of $160 - Either Black Semi-Gloss or Gloss Powder Coat - We would Invoice you through PayPal for powder coat..5-7 business days additional at powder coat if you add that option! Message us with any questions.
- This Complex Product is Amazingly Easy to Install with Grizzly's Unique Heavy Duty Design which incorporates the Main Frame is Welded - No confusing Bag of hardware for the multiple mounting locations!
- Buyer will easily mount the new Black Upper Seat Back cushion & then install the Base Cushion to the Flip Frame Section - The Flip Frame Section quickly bolts to welded Main Frame Unit!
- Additional Frame Supports bolt to the Honda Pioneer 500 Frame mounts.
- INCLUDED: New Black Seat Cushion Set
- INCLUDED: Welded Sheet Metal Muffler heat shield - no more open exposed muffler at the rear!
- INCLUDED: Huge 46" x 43" 13 Gauge Expanded Sheet Metal Big Buck Rack (when in the flip position!) (Flip measures: 29" x 14")
- Fabrication in Chickamauga, Georgia, USA - Not from overseas or Assembly Line Built and stored in a warehouse
- BUYER WILL EASILY INSTALL THE BASE CUSHION TO THE FLIP SECTION
(Must be Factory, stock Honda Pioneer 500 with stock rear rack that comes with that model! You may message or email us with a picture of your Honda Pioneer 500 if you have any questions about modifications which may not allow this to fit...)
BELOW: REAR FLIP SEAT IS IN FOLD OUT POSITION...RACK MEASURES AN EXTRA LARGE 46" X 43", WHICH INCLUDES BEHIND THE REAR SEAT STORAGE FOR COOLERS, TOOLS, OFF ROADING ITEMS, ETC.!
- This Extra Large Rear Seat Assembly will be sent Freight for BUYER TO PICK UP AT FREIGHT TERMINAL USING BUYERS ZIP CODE which mileage is not able to be determined until we have your zip code (some locations may be a distance drive, message us with your zip code before you purchase so we can tell you the estimated mileage for your drive OR WE CAN FREIGHT TO A COMMERCIAL BUSINESS ADDRESS THAT ACCEPTS FREIGHT which typically runs the same rate as to freight terminal pickup by buyer - we would need that Commercial Business Name & Address if you are shipping that way.
- WE ALSO NEED YOUR CONTACT PHONE NUMBER FOR THE FREIGHT BILL OF LADING - PLEASE SEND IT TO US!
- IMPORTANT NOTE ABOUT BUYERS IN PACIFIC & MOUNTAIN TIME ZONES- Due to distance & freight surcharges there is an add'l $80.00 freight surcharge fee to be Invoiced upon your purchase separately by us to our email through Paypal - for shipping this oversize pallet freight to Pacific & Mountain Time Zone locations!)
- Freight Pallet will NOT be sent to a Residential Delivery UNLESS the Additional Residential Delivery fee Freight charges of $100 is paid additional by us Invoicing you through PayPal for that amount after your purchase! The Freight company must downsize the Freight 18 wheelers to a Residential Delivery truck - and they charge add'l $100 for that service!
IMPORTANT: If you need to know the distance to your freight terminal pickup please email: firstname.lastname@example.org It will vary according to your location!
- PICTURED BELOW IS A SEPARATE GRIZZLY METALWORKS PRODUCT FOR THE HONDA PIONEER 500..IT IS NOT INCLUDED IN THIS LISTING of the Rear Flip Seat Assembly, BUT IS A Product on this website!
- If you are interested in the incredible Grizzly Honda Pioneer 500 Front Winch Plate Bumper - Raw Metal or Option for Powder Coat which includes 2 Welded "D" Ring Mounts, Super location for easy install of Buyer's Winch, & Welded Light Bar on PreRunner Hoop for Buyer's install of buyer's LED Light Bar PLEASE MESSAGE or EMAIL US!
WEBSITE SPECIAL: 15% OFF THE BELOW WINCH PLATE BUMPER WHEN PURCHASED WITH THIS REAR SEAT ASSEMBLY!