A UTV or Side x Side, etc. Rear Seat is to be used at low speeds only with Rear Passengers, just as if it were installed on a typical Golf Cart..
They are not for UTV higher speeds or unsafe terrain or driving conditions. Enjoy, Stay Safe, Have fun..But always Drive Responsibly...
Use at Buyer's own risk.
No Refunds, No Exchanges, No Cancellations - these are all Custom Fabricated Per Order!
- This Grizzly Product is RAW METAL FINISH (Grizzly's Standard Finish)-
- High Quality Metal & Fabrication
- Buyer can easily paint as we describe - suggestion Rustoleum Professional Spray Paint & Primer is a great Option- Black Semi-Gloss or of course your choice, (Take your time - 2 or 3 coats of primer and then the same with the spray paint..Great Finish then) - Easy and affordable to touch up after rugged work or play or even Truck Bed Coating, some buyers will LineX - many good ways to finish DIY Or you may want to powder coat when it arrives so you can view in person the sheen that your powder coater offers.
Fits:
John Deere Gator Turf, Trail, TS, 4x2, 6x4 and E-gators
with the metal dump bed! (49" Interior Bed Measurement)
YOUR DUMP BED INTERIOR MUST HAVE AT LEAST A 49" INSIDE MEASUREMENT FOR THE SEAT TO SLIDE IN!
GRIZZLY'S EXCLUSIVE CUSTOM REAR FLIP SEAT ASSEMBLY
INSTANTLY TRANSFORMS
YOUR Gator TO A COMFORTABLE AND USEFUL
4 PASSENGER UTV!
EXTRA EASY INSTALLATION
INSTALL INSTRUCTIONS, NEW BLACK SEAT CUSHION SET & HARDWARE ALONG WITH PRECISION DUMP BED PLATE TO SECURE DUMP FEATURE FROM ENGAGING WHILE SEAT IS INSTALLED ARE INCLUDED!
This is not a flimsy "golf cart rear seat that is uncomfortable to sit in".
Not from China!
Designed & Fabricated in our Facility Per Order with Options Available!
EXTRA HEAVY DUTY!
1.5" 14 Gauge Round Tubing for Side Handle Bars/Supports
We Personally Designed Every Aspect of this Unique Rear Assembly!
We also designed the Upper Seat Back Support with a slight tilt back for extra comfort and our large based new Black Seat Cushion is 14" - very adequate and comfortable for Adult Seating!
HIGH USA QUALITY!
DESIGNED AND CUSTOM FABRICATED PER ORDER AT OUR FACILITY IN CHICKAMAUGA, GA !
MANY UNIQUE OPTIONS AVAILABLE!
IMPORTANT INFORMATION ABOUT THE DUMP BED FEATURE ON YOUR GATOR!
- INCLUDES: GRIZZLY'S EXCLUSIVE HEAVY DUTY DUMP BED ATTACHMENT & HARDWARE TO PREVENT BED FROM DUMPING WHILE REAR SEAT IS INSTALLED!
- DO NOT USE REAR SEAT WITHOUT SECURING THE REAR CARGO BED FROM ITS DUMP FEATURE! IT IS THE RESPONSIBILITY OF THE OWNER - OPERATOR TO INSTALL AND MAINTAIN THE PROPER SAFETY ATTACHMENT!
A UTV Rear Seat is to be used at low speeds only with Rear Passengers, just as if it were installed on a typical Golf Cart at "golf cart low speeds.'
They are not for UTV higher speeds or unsafe terrain or driving conditions.
Adult Drivers!
Enjoy, Stay Safe, Have fun..
But always Drive Responsibly...Use at Buyer's own risk.
Standard 13 GA Expanded Sheet Metal or Options of the Tread Plate vs 13 GA Expanded vs Solid 14 GA; and Any other Options you may choose for your customization!
WEIGHT INFORMATION!
REAR FLIP SEAT ALONE 130 lbs. est. depending on the build...plus Options
CUSTOM OPTIONS BELOW!
Available for all Grizzly Rear Flip Seat Assemblies
2" Receiver DOES NOT interfere with a stock receiver...Great for quick hookups, pull a boat around, utility cart, around a campground!
.
CURRENT CUSTOM FABRICATION LEAD TIME:
18-20 + BUSINESS DAYS AND 1-2 BUSINESS DAYS IN SHIPPING FOR THE BUILD OF THE CUSTOM CRATE, WRAPPING WITH MOVING BLANKETS, STACKING BOXED CUSHION SET, HARDWARE/INSTALL INSTRUCTIONS, INCLUDES DUMP BED CUSTOM LATCH ATTACHMENT TO PREVENT BED FROM DUMPING AND ANY ADD'L OPTIONS BUYER HAS CHOSEN; THEN ORDERING OF THE BILL OF LADING FOR FREIGHT SHIPPING BY CENTRAL TRANSPORT ONCE WE THEN DELIVER TO THEIR TERMINAL IN CHATTANOOGA, TN. THEY WILL PROVIDE US THEIR PROTRACKING # WHICH WE WILL EMAIL YOU FOR EASY TRACKING ON THEIR WEBSITE. www.centraltransport.com
- This Grizzly Product is RAW METAL FINISH which is Grizzly Standard Finish- High Quality USA Metal!
- Buyer can easily paint as we describe - suggestion Rustoleum Professional Spray Paint & Primer - Semi-Gloss, (Take your time - 2 or 3 coats of primer and then the same with the spray paint..Great Finish then) - Easy and affordable to touch up after rugged work or play or even Truck Bed Coating, some buyers will LineX - many good ways to finish DIY Or you may want to powder coat when it arrives so you can view in person the sheen that your powder coater offers to match the stock Pioneer cage sheen.
- We Do Offer an Option for us to send out to our Industrial Powder Coater - see Below - these freight out on an extra large pallet and although we strive to wrap and secure to the best of our ability with wrap and moving blankets, once it is out of our hands we have no control over a bump in freight or with a forklift driver..
- We are Not Responsible for transit powder coating dings - Central Transport is amazing however as a Freight Company!
- Should you decide you would want the OPTION OF POWDER COAT, we cannot take any responsibility for freight "powder coating dings" once it is out of our hands - we wrap well with moving blankets, etc. but ships on an extra large pallet! Central Transport has amazing fork lift drivers, but these are extremely large to freight, being the reason Raw Metal Finish is our Standard!
Email gailglenfield@comcast.net if you want to add Powder Coat which we will invoice separately for..Top Notch Sheen to best match the Pioneer 500's black powder coating is GLOSS...HOWEVER, if you have it powder coated at your own powder coater; have them show you the sheen - various powders can produce a different sheen.
- POWDER COATING - Current Pricing with Top Notch Powder Coating BELOW
- Rear Flip Seat Assembly $280
- Option: Reverse "U" Grab Bar with 2" Receiver $110
- Option: 2" Receiver $50
- Option: 15" Pair of Welded Grab Bars $15
- Option: Seat Belt Option- Mounting Bar $35 (If "Small" Universal Seat - n/a as those seat belts mount to frame)
Est. Days at Powder Coater once we deliver to them - Add'l 7-9 Business Days