Shown Below: To the left is the complex "subframe" included which will be required to be welded to the frame for strength in bolting the winch bumper. (If you are ordering your bumper for us to send to powder coat, we do not powder coat the subframe - as the customer's muffler shop, welder, etc. would weld the raw metal subframe....customer could prepaint the subframe where it will not be welded..we suggest Rustoleum Flat Black or Semi-gloss or any protective paint..easy to touch up if needed - cost effective also!)
Raw Metal or Option for Professional Powder Coat Model Includes :
- OPTION: 3/4" thick shackle mounts with a 1 inch diameter hole fits Buyer's 3/4" "D" Rings , mounting hardware and instructions
- OPTIONS: Welded PreRunner Hoop
- OPTION: Pair of 4" Round Light Cut Outs OR 4" Cube Light Cut outs
- OPTION: Winch Roller Cut Out (Unless Pro Work Model)
- OPTION - Pair of 2" ROUND LIGHT CUT OUT FOR THE RELOCATION OF THE BLINKERS TO THE BUMPER.
- Stealthy, Unique Design included modified Plate with access holes to winch - shown in the photos - not a full skid plate; shown is attached to separate full skid plate!
- Mounting Hardware and Install Instructions
- Mounting clearance for winch placement: 6-3/4"
- Heavy Duty Winch Plate Ready WHETHER YOU CHOOSE THE OPTION FOR THE WINCH ROLLER ACCESS OR NOT. "BEHIND THE SCENES" THE WINCH PLATE IS PART OF THE HEAVY DUTY DESIGN, HOWEVER, SOME BUYERS MAY BE NOT READY FOR A WINCH RIGHT AWAY AND WILL THEN ORDER IT "WITHOUT THE WINCH ACCESS CUT OUT"!
- Shown in many of the pictures if a Harbor Freight 9000 lb winch - installs perfectly..we are not indicating that is the only winch but an idea to customers of what winch is used on the 1999 green Toyota Tacoma..Non-integrated Solenoid winch
- Shown in the picture is an installed 22" LED Light bar - base mounted (4-1/2" tall)..with spacing a similar 24" LED Light bar base mounted could work closely also. (22" is the best fit)
WORKS WITH NON INTEGRATED SOLENOID WINCH...It needs to be a non-integrated solenoid winch..(non-integrated solenoid can be mounted "somewhere else" besides on top of the winch for spacing.)
We suggest a 9000 lb. winch for this model vehicle - low profile- (full size trucks we suggest up to 12,000 lb winch.)
We do not promote any specific brand, but suggest that the Harbor Freight Badlands has a great fitting 9000 lb. winch that we personally have used on our '99 Tacoma and also on our full size trucks - easy add'l warranty too in today's times; again, not promoting or suggesting - but please be sure it is a non-integrated winch - We design our bumpers to be visually appealing but extremely useful for the purpose of off roading, trail riding, work around your property for winching needs...and by using a non-integrated solenoid winch, the Grizzly Winch Bumper non-bulky classy but rugged style is an amazing addition to your vehicle!
Modification for Blinkers: You will need to convert your market lights to be your blinkers with this bumper..Google how to do this, it is a common modification for aftermarket bumpers, since the factor blinkers are mounted in the factory mounted bumper and will not be used anymore.
OPTION: We are able to cut out 2 round holes for the following type amber lights for your blinkers!! Must be this light - we can provide you more details..Let us know! Many EBay Sellers sell this flush mounted amber light, some sell them as trailer lights - lights are not included..(2" Round amber flush mounted light shown below for blinker light relocation to bumper)
Full instructions to convert your marker lights to turn signals will be included in the hardware and install instructions with your bumper...or you may modify to your own needs..we are only just suggesting this method as a great, easy method...but it is not the only method..
"ONE METHOD OF CONVERTING THE MARKER LIGHTS INTO TURN SIGNALS WHEN INSTALLING AN AFTERMARKET BUMPER
Toyota 4 Runner and Tacoma: How to Convert Marker Lights to Turn Signals"........
Email: firstname.lastname@example.org if you are interested in the Combo Purchase of the Front Winch Plate Bumper and Rear Plate Bumper!
Fits: 1995 - 2004 Toyota Tacoma
- No Body Lift
- 1" Body Lift
- 2" Body Lift
- 3" Body Lift
SEE IMPORTANT FREIGHT RATE INFORMATION BELOW IN THE SNIP IT!!
YOU WILL BE INVOICED FOR ANY ADDITIONAL FREIGHT ACCORDING TO YOUR LOCATION/STATE AFTER YOUR PURCHASE WHEN WE RECEIVE YOUR ADDRESS DURING CHECKOUT!
You can purchase through the website as stated below and we will Invoice you for the Freight after your purchase OR you may email email@example.com and we will prepare a PayPal Invoice in detail of the build and email to you for payment.. (You do not need a PayPal account, there is a user friendly Option to pay by Visa, MC or Discover.)
Above: A Customized Bumper for a 20" LED Light Bar install by buyer!
Below: Dave from Virginia and his great 2004 Toyota Tacoma
Thank you Dave from Virginia for sending in the great finished and install pictures of your Grizzly Bumper for your 2004 Toyota Tacoma! The finish was so great, we thank you for sharing how you finished your bumper..it is awesome! "I love the way it turned out. it's aggressive looking but not too gaudy..Very clean looking. Everyone loved it on the 1st Gen Tacoma Facebook page, too....I started with POR15, then just factory paint matched and clear coated. I sprayed it in m garage so it's not perfect, but good enough for me. Great job on the assembly btw! I'm very happy, Thanks, Dave." Thank you so much Dave for sharing that..enjoyed working with you! Growing up in Waynesboro, VA as a girl, I will always think of you and Virginia! Best always..
IMPORTANT NOTE FOR TACOMAS - YEARS 2001-2004 -
TOYOTA TACOMA 1995-2004 EXTRA SPECIAL PRICING
Heavy duty Grizzly Front Winch Plate Bumper constructed of main frame 3/16" plate, heavy duty mounts & Grizzly's Front "Pro Work" Non Winch Plate Bumper Models constructed of main frame 3/16" plate. Never a compromise on strength and design work.
Fits: 1995 - 2004 Toyota Tacoma 4 Different Models - No Body Lift; 1" Body Lift; 2" Body Lift; or 3" Body Lift
BUYER MUST LET US KNOW WHICH ONE YOU HAVE WHEN YOU ORDER!
Each bumper is Precision crafted at our facility in Chickamauga Ga. Local pickups may be arranged to meet at a convenient location, 8% Georgia Sales Tax is added for pickups in Georgia.
For distance buyers we build a pallet for the bumper and ship them freight to a terminal nearest your location.
- DESIGNED & FABRICATED EXCLUSIVELY BY GRIZZLY METALWORKS, CHICKAMAUGA, GEORGIA
- PRECISION, DESIGNED, CNC Cut & CRAFTED, MADE IN THE USA
- FRONT WINCH PLATE BUMPER BRUSH GUARD
- Priced Affordably; Stealthy Grizzly Metalworks Exclusive Design!
- Don't Miss out on this unbelievable Offer! 1
- Built in Mount for your winch (standard size winch- est. 9000 lb) (Winch Not Included)
- Exact Mounting, Design & Fabrication are specific to the Model Vehicle
Precision Crafted at our Shop! Never from "overseas" or "warehoused"
3/16" USA Steel Plate
100% Made in the USA!
Super Affordable, USA Quality