GRIZZLY METALWORKS & (GRIZZLY WINCH BUMPERS) - USA CUSTOM FABRICATED STEALTHY, UNIQUE PRODUCTS for: Truck/Jeep Winch Plate Trail Riding & Work Bumpers; Side x Side Rear Flip Seats, Bumpers; Golf Cart Clays & Interior Baskets; Brush Guards & More

  

 
Please email:  gailglenfield@comcast.net  with questions or to place an order. 
$850.00 RAW METAL PLUS FREIGHT
*Unique Welded Assembly!
Designed & Fabricated in the USA Per Order! 
This Product ships Freight - either to a Commercial Business Location OR to Central Transport Terminal for Buyer's pickup if in a viable location! 
 
PLEASE READ THE 3 FREIGHT SNIP ITS IN THIS PRODUCT PAGE BELOW CAREFULLY!
 
NO Residential Deliveries, this will be delivered by an 18 Wheeler
 
THIS IS A WELDED REAR FLIP SEAT ASSEMBLY - NOT A BOLT TOGETHER!
 
FABRICATED FROM SQUARE USA TUBING!
 
HEAVY DUTY
 
HIGH QUALITY NEW BLACK SEAT CUSHION SET WITH 14" BASE; NOT THE TYPICAL "GOLF CART" SMALL BASE THAT YOU FEEL LIKE YOU ARE FALLING OFF OF!
 
Includes Welded 2" Receiver to Foot Plate - a $75 value - FREE
Note Mounting:  Easy install with DIY drilling to bolt into your bed at standard mounting points..we will supply typical hardware, however, you may want to use longer bolts, etc. depending on your bed.
Some customers will fab a DIY mount from the footplate of the rear seat assembly to the frame for add'l support as needed in use.
 
EACH REAR SEAT ASSEMBLY ARE CUSTOM FABRICATED PER ORDER!!
 
LEAD TIME:  ESTIMATE 20-24 BUSINESS DAYS
 
PLEASE READ ALL SNIP ITS ON FREIGHT FOR THE INFORMATION THAT BUYERS MUST PROVIDE US FOR SMOOTH FREIGHT SHIPPING!
MESSAGE WITH ANY QUESTIONS!
$99.95 Freight Rate pertains to Eastern & Central Time Zones - with exclusions as noted on the snip its...PACIFIC AND MOUNTAIN TIME ZONES WILL HAVE ADD'L FUEL SURCHARGE ADDED AFTER THE PURCHASE BY INVOICE.  PLEASE MESSAGE US BEFORE YOU PURCHASE FOR YOUR FULL FREIGHT RATE ACCORDING TO YOUR LOCATION..NEED DETAILS PER THE FREIGHT SNIP ITS!!
 
ALWAYS NEED YOUR BEST PHONE # CONTACT & EMAIL ADDRESS WHEN YOU PURCHASE..
 
FAST AND EASY INSTALL OF THE WELDED UNIT IN MINUTES!

Special Website Pricing:
 
$850.00  Raw Metal + Freight to Business/Commercial Location OR to Central Transport Terminal...email for  Freight quote to your zip code!

 (*Shipping to lower 48 states only - not remote areas or islands)

Typically $99.95 in Central And Easter Time Zones Freight to standard Business/Commercial Location or a Central Transport Terminal for Buyer's Pickup; Surcharges for other Time Zones - Email for Quote with your address and details.  

 

THIS IS A WELDED UNIT THAT EASILY MOUNTS TO STOCK RHINO AS LISTED IN DETAILS...

No confusing bag of hardware; No multitude of Parts...Welded Unit Assembly.

USA SQUARE TUBING MAIN FRAME WORK AS SHOWN IN THE PICTURES..

 

RAW METAL FINISH.

WE DO NOT SHIP ANY POWDER COATED FREIGHTED ITEMS!

Yamaha Rhino, Years 2004-2012, if still with a factory rear bed, should measure 39-1/2" when the tailgate is removed - which is the required opening for the Rear Flip Seat/Big Buck Rack mounting for a precision, perfect tight fit..

Note Mounting:  Easy install with DIY drilling to bolt into your bed at standard mounting points..we will supply typical hardware, however, you may want to use longer bolts, etc. depending on your bed.
Some customers will fab a DIY mount from the footplate of the rear seat assembly to the frame for add'l support as needed in use.
 

 

  • This is the ultimate UTV Heavy Duty Rear Flip Seat for Hunting, Personal Family Rides, Ranch & Farm work, Campgrounds....Extra Heavy Duty All Metal Rear Seat/Big Buck Rack Combo; for your 2004-2012 Yamaha Rhino!
  • Quality Black Seat Cushion Base (14", not the small ones that are being thrown on golf cart rear seat kits where you feel like you are falling off them!) and Upper Black Seat Cushion.
  • Custom Designed and Fabricated Grizzly Rear Seat Assemblies from 100% American Steel.
  • No other Manufacturer Fabricates this Incredible UTV Heavy Duty Rear Seat for your Rhino...
  • Welded Unit!!!  NOT A BOLT TOGETHER!
  • Fits Stock 2004-2012 Yamaha Rhino - with Stock Factory Rear Cargo Bed & Factory Yamaha Rhino Cage & Top
  • Raw Metal Finish ONLY! DIY Buyer finishes
  • Special Yamaha Rhino UTV Features to work Specifically with the stock Rhino rear bed for an "enclosed feel"; Plus our custom Engineered Supports and mounts to the frame eliminate the dump feature.
  • INCLUDES:  Free 2" Welded Receiver to foot plate (a $75 value)
FEATURES:
- A Full 33" Metal Rear Flip Seat transforms your stock Rhino Rear Bed into a 4 Passenger UTV Plus additional Large Interior Storage from the Original Bed! Huge Space for coolers, beach chairs, tools, gas cans, camping gear, hunting gear...endless uses and you are able to transport 4 Passengers too! 
-SUPER STORAGE SPACE BEHIND THE REAR SEAT ASSEMBLY
-NEW BLACK SEAT CUSHION SET..33" ALL METAL RACK WHEN CUSHION IS REMOVED!  STEALTHY! NO WEAK "PIANO HINGES"...NO PLASTIC OR POLYBOARD DECKING!  ONLY 13 GAUGE EXPANDED SHEET METAL.
- 2" WELDED RECEIVER HITCH TO FOOT PLATE
- HEAT SHIELD
- EXHAUST PIPE EXTENSION, WE INCLUDE IT FOR FREE..IF YOU WISH TO ADD TO YOUR EXHAUST PIPE
- WELDED UNIT, ADD'L HARDWARE AS NEEDED FOR INSTALLATION INCLUDED
-RAW METAL FINISH 
-Note Mounting:  Easy install with DIY drilling to bolt into your bed at standard mounting points..we will supply typical hardware, however, you may want to use longer bolts, etc. depending on your bed.
Some customers will fab a DIY mount from the footplate of the rear seat assembly to the frame for add'l support as needed in use.
 
CONVERT YOUR 2004-2012 STOCK YAMAHA RHINO INTO A 4 PASSENGER UTV THAT COMFORTABLY CARRIES 4 ADULTS AND FOLDS INTO A 33" HEAVY DUTY CARGO RACK WITH 13 GAUGE EXPANDED SHEET METAL BASE...NOT "MESH"..NOT "POLYBOARD"!!!

 

 THIS PRODUCT IS AVAILABLE RAW METAL FINISH ONLY..

BUYERS ENJOY FINISHING WITH THEIR TIME AND TALENT AND COST SAVINGS TO THEM VS POWDER COAT...We suggest prime, several coats of a quality spray paint such as Rustoleum Professional Spray paint in Semi-gloss Black...some buyers like the rugged look of Truck Bed coating or even LineX, etc.

Grizzly Metalworks UTV - Side x Side Heavy Duty Rear Flip Seat/Big Buck Rack Combo

  • Includes New Quality Black Rear Seat Cushion Set with 13 Gauge Expanded Sheet Metal Base & Foot Plate; Includes a Welded 2" Receiver which is great for pulling a utility cart...
  • Not plastic or polyboard decking!  
  • No weak "piano hinges", Industrial Bolts for the flip - heavy duty! 

Below is a Grizzly Metalworks Yamaha Rhino Rear Flip Seat Assembly with its extensive heavy duty mounts, frame work, 13 gauge expanded sheet metal 33" flip seat assembly (no flimsy piano hinges), 13 gauge expanded sheet metal foot plate with welded 2" receiver, new Black Seat Cushion Set , Heat Shield, Exhaust Pipe Extension, Handle Bars; and includes mounting hardware and install instructions 

  •  HOW TO ORDER...This product is not available for online purchase..please email: gailglenfield@comcast.net with your order and we will Invoice you for the payment of the build and any options you would like to add..

Available for: Yamaha Rhinos 2004-2012 Stock Carts

 

 

BELOW:  Thank you Rodney from Georgia for sending in the great pictures below of your Yamaha Rhino "knock off", Massimo Alligator 700, with the installed Grizzly Rear 33" UTV/Side X Side Flip Seat Assembly with Welded 2" Receiver...you did an awesome job on the minor modifications..It looks incredible!  We appreciate you taking the time to send in the super pictures!  

massimo alligator 700 rear seat

 

yamaha rhino rear flip seat

 

BELOW Additional Product:  Grizzly's Stealthy Yamaha Rhino "Swat Cage" and Rear Flip Seat/Big Buck Rack!  An Instant Transformation!

This Unit must ship Freight!  Contact gailglenfield@comcast.net for a freight quote to your location - Freight Terminal Pickup OR to a Commercial/Business Location (some exclusions of businesses pertain..let us know.)

Below:  Shown with a Grizzly Metalworks "Swat Rear Cage"...Great Combo Purchase!

yamaha rhino flip seat and rear swat cage

  • This is the ultimate UTV Heavy Duty Rear Flip Seat for Hunting, Personal Family Rides, Ranch & Farm work, Campgrounds....Extra Heavy Duty All Metal Rear Seat/Big Buck Rack Combo; for your 2004-2012 Yamaha Rhino!
  • We handcraft all Grizzly Rear Seat Assemblies from 100% American Steel.
  • No other Manufacturer Fabricates this Incredible UTV Heavy Duty Rear Seat for your Rhino...
  • Fits Stock 2004-2012 Yamaha Rhino - with Stock Factory Rear Cargo Bed & Factory Yamaha Rhino Cage & Top
  • Raw Metal Finish ONLY! DIY Buyer finishes
 
CONVERT YOUR 2004-2012 STOCK YAMAHA RHINO INTO A 4 PASSENGER UTV THAT COMFORTABLY CARRIES 4 ADULTS AND FOLDS INTO A 33" HEAVY DUTY CARGO RACK
 
Yamaha Rhino, Years 2004-2012, if still with a factory rear bed, should measure 39-1/2" when the tailgate is removed - which is the required opening for the Rear Flip Seat/Big Buck Rack mounting for a precision, perfect tight fit..
 
NOT TO BE USED FOR ANY ROLL OVER PROTECTION - REAR SEAT/BIG BUCK RACK OR REAR CAGE ARE NOTTO BE USED IN FOR ANY ROLLOVER PROTECTION! 
  • We DO NOT provide seat belts or seat belt harnesses with our Rear Seats..A UTV Rear Seat is to be used at low speeds only with Rear Passengers, just as if it were installed on a typical Golf Cart..They are not for UTV higher speeds or unsafe terrain or driving conditions.  Enjoy, Stay Safe, Have fun..But always Drive Responsibly...Use at Buyer's own risk.