Important!! WE SHIP FREIGHT THROUGH CENTRAL TRANSPORT TO THEIR CLOSEST TERMINAL USING YOUR ZIP CODE FOR YOUR PICKUP THERE- Monday to Friday typically their hours are 8 a.m. to 5 p.m. for your pickup of the large Crated Bumpers..,.. OR IF YOU ARE CLOSE TO CHATTANOOGA, TN- YOU CAN PICK UP AT ONE OF OUR STORAGE UNITS AFTER COMPLETION AT NO CHARGE.
ABOVE SHOWS STANARD HEIGHT PRERUNNER HOOP OPTION
BELOW SHOWS MID HEIGHT PRERUNNER HOOP OPTION
SHOWN BELOW IMPORTANT:
We do have an Option for a 24" Light Cut Out - Add'l $75 which we can paypal invoice you after the purchase should you want that change in design!
PLEASE BE ADVISED THAT THE LIGHT CUT OUT WILL ONLY WORK ON THE FIRST GENERATION TACOMA THAT IS NOT A WINCH BUMPER...MEANING A WORK PRO-MODEL AS THERE IS NOT SUFFICIENT ROOM FOR THE LIGHT BAR AND THE WINCH!!
(shown with standard height PreRunner - although your choice also could be the mid-height PreRunner!)
- BELOW PICTURE SHOWS - OPTIONS...24" LED LIGHT CUT OUT, TWO PAIRS OF LIGHT TABS, WINCH ROLLER ACCESS CUT, WELDED "D" RING MOUNTS! (Powder Coat is also an Option - shown is Semi-Gloss Black)
Grizzly's Front Winch Plate Hybrid Bumper -
The Ultimate Custom Design by Grizzly Winch Bumpers
100% DESIGNED AND CUSTOM FABRICATED PER ORDER IN THE USA.
NOT FROM CHINA!
3/16" WINCH PLATE HYBRID TUBE BUMPER
WHEN YOU CHECK OUT, WE NEED TO KNOW IF YOUR TACOMA HAS A BODY LIFT... 1", 2" OR 3" FOR OUR ADJUSTMENTS..
SUSPENSION LIFTS OK...JUST TELL US IT DOES NOT HAVE A BODY LIFT THEN!
- Heavy Duty Winch Plate Ready WHETHER YOU CHOOSE THE OPTION FOR THE WINCH ROLLER ACCESS OR NOT. "BEHIND THE SCENES" THE WINCH PLATE IS PART OF THE HEAVY DUTY DESIGN, HOWEVER, SOME BUYERS MAY BE NOT READY FOR A WINCH RIGHT AWAY AND WILL THEN ORDER IT "WITHOUT THE WINCH ACCESS CUT OUT"!... - (9000-12000 standard non-integrated solenoid winch) (winch not included)
- WORKS WITH NON INTEGRATED SOLENOID WINCH...It needs to be a non-integrated solenoid winch..(non-integrated solenoid can be mounted "somewhere else" besides on top of the winch for spacing.)
- OPTION: This Hybrid model is able to have 2 Pairs of tabs for base mounted light mounting. Includes the welded upper light tabs for the specific spacing sizes needed, whether you are installing round or square lights...typically most 4" may work - depending on the casing, etc. (lights not included)
- OPTION: Welded pair of 3/4" thick shackle mounts with a 1 inch diameter hole fits Buyer's 3/4" "D" Rings
- OPTION: Winch Roller Access Cut Out
- OPTION: Hoop
- OPTION: 24" Cut out for Customer's Light Bar (Light no included)
- Stealthy - Precision Build
- 100% Made in the USA!
- Never Warehoused - Never from China
- Raw Metal Finish - the Grizzly Standard - OR Option Professional Powder Coat
- DIY Buyer may prime & Paint for their own finishing touch- we suggest a great paint is Rustoleum Professional gloss, semi-gloss or matte black- put your touches on it and easy to fix any rough rugged play or work if scratched vs powder coat;or Truck Bed Coat; or LineX or Powder Coat...Buyer's choice..
- All Ship Freight in our custom built new crates!!
- However, if you are located within a close drive to Chattanooga, TN area, we meet buyers frequently from Alabama, Nashville, Knoxville, Atlanta, etc. to eliminate the Freight shipping! We do not charge to meet a buyer if within our service area!!!!
- BELOW PICTURE SHOWS - OPTIONS...24" LED LIGHT CUT OUT, TWO PAIRS OF LIGHT TABS, WINCH ROLLER ACCESS CUT, WELDED "D" RING MOUNTS! (Powder Coat is also an Option - shown is Semi-Gloss Black)
Shown Below: To the left is the complex "subframe" included which will be required to be welded to the frame for strength in bolting the winch bumper. (If you are ordering your bumper for us to send to powder coat, we do not powder coat the subframe - as the customer's muffler shop, welder, etc. would weld the raw metal subframe....customer could prepaint the subframe where it will not be welded..we suggest Rustoleum Flat Black or Semi-gloss or any protective paint..easy to touch up if needed - cost effective also!) (Picture below shows Plate Bumper - Subframe info etc. is for either Plate or Hybrid Bumper)
GRIZZLY ALSO OFFERS THIS EXCLUSIVE HYBRID BUMPER AS A NON-WINCH MODEL for those customers who will not be installing a Winch - but who want the Ultimate Bumper for your Tacoma!
You can purchase through the website as stated below OR you may email gailglenfield@comcast.net and we will prepare a PayPal Invoice in detail of the build and email to you for payment.. (You do not need a PayPal account, there is a user friendly Option to pay by Visa, MC or Discover.)
WORKS WITH NON INTEGRATED SOLENOID WINCH...It needs to be a non-integrated solenoid winch..(non-integrated solenoid can be mounted "somewhere else" besides on top of the winch for spacing.)
- Don't Miss out on this unbelievable Offer!
- Built in Mount for your winch (standard size winch- est. 9000 lb-12000) (Winch Not Included) MUST BE NON INTEGRATED SOLENOID WINCH
- Exact Mounting, Design & Fabrication are specific to the Model Vehicle
Precision Crafted at our Shop! Never from "overseas" or "warehoused"
3/16" USA Steel Plate
100% Made in the USA!
Stealthy Designs!
Super Affordable, USA Quality