Extended Lead Time!! UNIVERSAL SIDE X SIDE REAR WELDED FLIP SEAT-w/Heat Shield; Creates Cargo Area Behind Seat. Fits STOCK REAR BED UTVs- Raw Metal, 2 sizes - MEDIUM & LARGE ONLY- Polaris Ranger XP 1000, John Deere Gator, 13 GA Exp. Sheet Metal - OPTIONS

Vendor: Grizzly Metalworks
Regular price: $1,595.00
Sale price: $1,595.00
Regular price
Unit price: per

Model

Tailgate opening size

Finish

Quantity must be 1 or more

EXTENDED LEAD TIME: EST. 35-45 BUSINESS DAYS!

NOTE: All Products come in RAW METAL FINISH for your DIY paint or powder coat

GRIZZLY OFFERS 2 SIZES FOR THE UNIVERSAL REAR SEAT!

LARGE, & MEDIUM...we do NOT offer the SMALL size at this time!!!

See Below for Tailgate Opening Needed

NOTE: 13 GA EXPANDED SHEET METAL BASE, FLIP & FOOT PLATE ONLY!

CONTACT: gailglenfield@comcast.net prior to Order!!

GRIZZLY OFFERS 2 SIZES FOR THE UNIVERSAL REAR SEAT!

LARGE, & MEDIUM...we do NOT offer the SMALL size at this time!!!

See Below for Tailgate Opening Needed

Above Snip it Shows the Dimensions for the Tailgate Opening needed for the "MEDIUM" & "LARGE" Size Rear Seat ...

IF YOU HAVE A SMALL SIZE.....WE NO LONGER OFFER THAT MODEL!! "SMALL SIZE" such which fits a "Kawasaki Mule", etc. which have a more narrow Tailgate Opening - will use the "SMALL" Size which the Seat Frame measures: 39" Width x 24" Depth;

IF AFTER USING THE ABOVE CALCULATIONS FOR REQUIRED TAILGATE OPENING AND YOU HAVE A SMALLER SIZE OPENING REAR SEAT WHICH IS LESS THAN 41-1/4" IN WIDTH, MEANING YOUR OPENING IS TOO WIDE FOR THE STEP 2A - "Tailgate Opening MUST be at least 41-1/4"...
DO NOT ORDER!!!
WE NO LONGER OFFER THE SMALL SIZE!
CURRENT CUSTOM FABRICATION LEAD TIME:

(IMPORTANT: Mounts from foot plate to frame are not included with any Universal Model Rear Flip Seat Assemblies!! Customers will need to secure their dump bed from potential dumping with either a permanent or removable method after installing and prior to use depending on their needs for either a more "permanent" or a method for easy removal if you intend to remove seat more frequently!)

REAR SEAT IS EASILY BOLTED DOWN IN REAR CARGO BED..

EXTRA EASY INSTALL!

HARDWARE AND INSTRUCTIONS INCLUDED FOR EACH OF THE 2 MODELS!

This Grizzly Product is RAW METAL FINISH
(Grizzly's Standard Finish)-

Buyer can easily prime and paint whether they want gloss, textured or flat, etc. or even a different color than black..We offer tips on using Rustoleum Professional Primer and Paint as an affordable way to finish the raw metal and easy touch up vs once it is powder coated, much more difficult to touch up!
IMPORTANT: FOR ALL DUMP BED SIDE X SIDES!! CUSTOMER'S RESPONSIBLITY TO SECURE PROPERLY THE DUMP BED FEATURE!!!!!!
For All Side x Sides which have the Rear Cargo Dump Bed Feature..It is Imperative to BOLT OR SECURE PROPERLY THE DUMP BED FEATURE WHILE THE REAR SEAT IS INSTALLED; To Avoid Any Potential Accidential Dumping While Carrying Riders! Whether you do a Permanent Bolting or a latch/lock for times throughout the year you may want to remove the seat for other farm/work chores!

NOTE: All Products come in RAW METAL FINISH for your DIY paint or powder coat

JOHN DEERE GATOR REAR WELDED FLIP SEAT ASSEMBLY- Raw Metal -Instant Transformation for your Gator to a Comfortable 4 Passenger! USA High Quality

Below Option:

2" Heavy Duty Receiver Hitch!

Available for Medium & Large Models!

Below Option: Reverse "U" Grab Bar with Welded 2" Receiver Option....... Available for Medium & Large Models

Below Option:

Seat Belt Mounting Bar & Pair of New Retractable Seat Belts is Available for the Medium and Large" Universal Rear Seats as shown below!

A UTV Rear Seat is to be used at low speeds only with Rear Passengers, just as if it were installed on a typical Golf Cart..They are not for UTV higher speeds or unsafe terrain or driving conditions. Enjoy, Stay Safe, Have fun..But always Drive Responsibly...Use at Buyer's own risk.

Email: gailglenfield@comcast.net with any questions!

Also, Includes Amazing & Effective Heat Shield - New Black Seat Cushion Set (medium & large), 13 Ga Expanded Smooth Sheet Metal Standard OR Option for 14 Ga Solid & Option for Treadplate for foot Plate- Mounting Instructions and Hardware!

Additional Options - Seat Belt Assembly with Grizzly's Seat Belt Mounting Bar(medium & large) & Hardware; Custom Heavy Duty 2" Receiver to Foot Plate (for medium & large)- & 14 Gauge Tread plate footplate; Pair of 15" Welded Grab Bars on Handle Bars (medium & large models)!

See Checkout for Options & Pricing

IMPORTANT: FOR ALL DUMP BED SIDE X SIDES!!
For All Side x Sides which have the Rear Cargo Dump Bed Feature..
It is Imperative & is the Customer Responsibility to BOLT OR SECURE PROPERLY THE DUMP BED FEATURE WHILE THE REAR SEAT IS INSTALLED; To Avoid Any Potential Accidential Dumping While Carrying Riders! (Mounts from foot plate to frame are not included with the Universal Model - Customers will need to secure their dump bed from potential dumping with either a permanent or removable method after installing and prior to use!

This Grizzly Product is RAW METAL FINISH _ High Quality USA Metal!
Buyer can easily paint as we describe - suggestion Rustoleum Professional Spray Paint & Primer - Semi-Gloss, Gloss - Easy and affordable to touch up after rugged work or play or even Truck Bed Coating, some buyers will LineX - many good ways to finish DIY Or you may want to powder coat when it arrives so you can view in person the sheen that your powder coater offers to match the stock Pioneer cage sheen

CUSTOM OPTIONS SHOWN BELOW:

Available for all Grizzly Rear Flip Seat Assemblies

2" Receiver DOES NOT interfere with stock receiver...Great for quick hookups, pull a boat around, utility cart, around a campground!

We exceed in Design and Fabrication and also in Shipping for the build of the custom crate and extensive Freight wrapping for the best possible shipment of the extra large pallet 52" x 48" x 31" to our great customers!

HOW WE SHIP THESE LARGE REAR SEATS FREIGHT!

Extensive Wrapping Process!

The Pictures Below show the typical manner in which we box this complex build..we do not assemble the cushion set to the seat back support or frame as with raw metal it would need to be removed for painting or powder coat. They are easy to install and this method is best protection during freight travel.

On top of the box is the safest way we have found to secure the hardware/install instructions & seat belts if purchased with the build..

(Just make sure you do not cut the boxed seat cushion box when you open it!)

This configuration would be changed if the customer purchased the Rear Grab Bar which we secure that in moving blankets also - therefore we typically switch the seat box location for that to secure safely on the foot plate and the box on the frame.

Next step, we use 2 new moving blankets and shrink wrap along with full taping of the shrink wrap and rachet straps to the new pallet we build - and it then is ready for us to deliver to the Central Transport terminal in Chattanooga with our Bill of Lading.

Quite a tedious day in our Shipping Department, but ready for Freight!

UNIVERSAL SIDE X SIDE REAR WELDED FLIP SEAT-w/Heat Shield; Rear Cargo Area. Fits in STOCK REAR BED - Raw Metal, 2 sizes- Polaris Ranger XP 1000, John Deere Gator, Kawasaki Mule, etc. Rear Bed UTV's!13 GA Exp. Sheet Metal - OPTIONS

IMPORTANT: FOR ALL DUMP BED SIDE X SIDES!!
For All Side x Sides which have the Rear Cargo Dump Bed Feature..It is Imperative to BOLT OR SECURE PROPERLY THE DUMP BED FEATURE WHILE THE REAR SEAT IS INSTALLED; To Avoid Any Potential Accidential Dumping While Carrying Riders!

IMPORTANT: FOR ALL DUMP BED SIDE X SIDES!!
For All Side x Sides which have the Rear Cargo Dump Bed Feature..It is Imperative to BOLT OR SECURE PROPERLY THE DUMP BED FEATURE WHILE THE REAR SEAT IS INSTALLED; To Avoid Any Potential Accidential Dumping While Carrying Riders!

"Gail,

The seat looks great! Took it for a spin and nothing fell off!

Thank you for a wonderful product. Delivery was flawless. Had it powder coated and on the Polaris in a week. Installed by 1 woman and a turkey decoy as my extra 2 hands! Ready for spring sporting clay season!!!

Thank you again, Anne"

Thank you Anne from Kansas for sending in the below great pictures of your Polaris Ranger XP 1000 with your super install of Grizzly's Rear Welded Flip Seat Assembly!

Your details were great in ordering the "Universal" Model to fit your Ranger where you indicated "Max width is 50 ¼ inches so it fits in my rear bed". The model you chose was the 14 gauge solid sheet metal base & flip with 14 gauge treadplate foot plate & option you added of the welded 2" Receiver!

Super job! Hope you enjoy it on your hunting adventures!

BELOW IS THE INCREDIBLE ROUND TUBING DESIGN -
WHICH IS USED IN UTV MODELS WITH A
UNIVERSAL MEDIUM AND LARGE REAR BED

See snip it information for sizing to order the correct Design!

13 Gauge Expanded Sheet Metal Base/Flip & Foot Plate

Storage space behind the Rear Seat Back Cushion Set for Tools, Gear, Cargo, Coolers, Off Road Equipment, Camping Gear & More

Uniquely Designed for your UTV, Premium Engineered, Extra Heavy Duty!

Our Unique Heavy Duty Design includes foot plate gussets which reinforce the joint where the foot plate connects to the handle bars to prevent any rotational forces at the joint.

You will be well pleased with the High USA Quality and Design Work by Grizzly Metalworks!

Custom Fabricated Per Order!

Never from China!!

IMPORTANT: FOR ALL DUMP BED SIDE X SIDES!!
For All Side x Sides which have the Rear Cargo Dump Bed Feature..It is Imperative to BOLT OR SECURE PROPERLY THE DUMP BED FEATURE WHILE THE REAR SEAT IS INSTALLED; To Avoid Any Potential Accidential Dumping While Carrying Riders!

NOT TO BE USED FOR ANY ROLL OVER PROTECTION - REAR SEAT/BIG BUCK RACK OR REAR CAGE ARE NOTTO BE USED IN FOR ANY ROLLOVER PROTECTION!

A UTV Rear Seat is to be used at low speeds only with Rear Passengers, just as if it were installed on a typical Golf Cart..They are not for UTV higher speeds or unsafe terrain or driving conditions. Enjoy, Stay Safe, Have fun..But always Drive Responsibly...Use at Buyer's own risk.

Back to UTV/Side x Side, Honda Pioneer 500 & 520's Rear Welded Flip Seats

Extended Lead Time!! UNIVERSAL SIDE X SIDE REAR WELDED FLIP SEAT-w/Heat Shield; Creates Cargo Area Behind Seat. Fits STOCK REAR BED UTVs- Raw Metal, 2 sizes - MEDIUM & LARGE ONLY- Polaris Ranger XP 1000, John Deere Gator, 13 GA Exp. Sheet Metal - OPTIONS

REAR SEAT IS EASILY BOLTED DOWN IN REAR CARGO BED..

EXTRA EASY INSTALL!

HARDWARE AND INSTRUCTIONS INCLUDED FOR EACH OF THE 2 MODELS!

IMPORTANT: FOR ALL DUMP BED SIDE X SIDES!! CUSTOMER'S RESPONSIBLITY TO SECURE PROPERLY THE DUMP BED FEATURE!!!!!!

NOTE: All Products come in RAW METAL FINISH for your DIY paint or powder coat

Also, Includes Amazing & Effective Heat Shield - New Black Seat Cushion Set (medium & large), 13 Ga Expanded Smooth Sheet Metal Standard OR Option for 14 Ga Solid & Option for Treadplate for foot Plate- Mounting Instructions and Hardware!

Additional Options - Seat Belt Assembly with Grizzly's Seat Belt Mounting Bar(medium & large) & Hardware; Custom Heavy Duty 2" Receiver to Foot Plate (for medium & large)- & 14 Gauge Tread plate footplate; Pair of 15" Welded Grab Bars on Handle Bars (medium & large models)!

See Checkout for Options & Pricing

IMPORTANT: FOR ALL DUMP BED SIDE X SIDES!!

For All Side x Sides which have the Rear Cargo Dump Bed Feature..

IMPORTANT: FOR ALL DUMP BED SIDE X SIDES!!

For All Side x Sides which have the Rear Cargo Dump Bed Feature..It is Imperative to BOLT OR SECURE PROPERLY THE DUMP BED FEATURE WHILE THE REAR SEAT IS INSTALLED; To Avoid Any Potential Accidential Dumping While Carrying Riders!

IMPORTANT: FOR ALL DUMP BED SIDE X SIDES!!

For All Side x Sides which have the Rear Cargo Dump Bed Feature..It is Imperative to BOLT OR SECURE PROPERLY THE DUMP BED FEATURE WHILE THE REAR SEAT IS INSTALLED; To Avoid Any Potential Accidential Dumping While Carrying Riders!

IMPORTANT: FOR ALL DUMP BED SIDE X SIDES!!

For All Side x Sides which have the Rear Cargo Dump Bed Feature..It is Imperative to BOLT OR SECURE PROPERLY THE DUMP BED FEATURE WHILE THE REAR SEAT IS INSTALLED; To Avoid Any Potential Accidential Dumping While Carrying Riders!